You bought a kit and don't want to climb the roof
The dish ships in a box. Getting it onto a steep roof, through the siding and to the right spot inside is the part most people would rather hand off.
Professional Starlink Installation on Chicago's North Shore
Clean mounts. Hidden cables. Whole-home coverage.
You bought the kit. We handle the roof, the cable run and the WiFi. Abvolt Automation is an electrical and low-voltage contractor in Lake Bluff, installing Starlink across Lake County and the North Shore with the same care we put into panels and structured cabling.
InsuredBBB AccreditedBased in Lake Bluff, IL
Who it's for
Who we install Starlink for
Most of our Starlink jobs come from one of these five situations.
Large homes with dead zones
The included router covers one floor well. Older North Shore homes with plaster walls, additions and coach houses need more than one access point to cover the rest.
Starlink backup internet
Keep Comcast or AT&T as your main line and add Starlink as automatic failover, so a cut cable doesn't take down work, cameras or alarms.
Home offices
A hardwired connection to your desk for steady video calls and uploads, no matter what the rest of the house is streaming.
Businesses and job sites
Temporary or permanent internet for offices, construction trailers and sites where cable or fiber isn't in yet.
What's included
What's included in a professional Starlink install
Every install covers the dish, the cable path and the network inside the house.
Site survey and obstruction check
We check the sky view for trees and rooflines before picking a location, so the dish isn't fighting for signal the day it goes up.
Roof, eave, wall or pole mounting
A Starlink roof mount installation, eave, wall or pole mount chosen for your roof type and sight line. Every penetration is flashed and sealed.
Weatherproof entry and concealed routing
Cable enters through a sealed wall plate with a drip loop, then runs through the attic, basement or conduit, not across the siding.
Ethernet adapter and hardwired connections
We add the ethernet adapter and run Cat6 to offices, TVs and consoles that shouldn't depend on WiFi.
Whole-home mesh WiFi setup
Mesh nodes or wired access points placed by survey, so coverage reaches the basement, the top floor and the patio.
Automatic failover with your current provider
Starlink and your existing internet connected to a dual-WAN router that switches over on its own when one line drops.
Testing and walkthrough
Speed and coverage tested room by room, then a walkthrough of the app, the hardware and what to do if something stops working.
Why Abvolt
Why hire Abvolt instead of a basic install
A basic install puts the dish up and plugs in the router. That's where most problems start: cable stapled across the siding, an unsealed hole in the roof, and WiFi that still doesn't reach the back bedroom.
An electrical backgroundWe're an electrical and low-voltage contractor, so power, grounding and cable routing are done the way an inspector would expect.
Clean, code-conscious workmanshipSealed penetrations, proper drip loops, conduit where cable is exposed, and nothing left loose on the roof.
We handle the network inside the houseThe WiFi, the wiring and the failover are part of the job, not just the dish.
InsuredYour roof and your home are covered while we work.
BBB accreditedA local company you can reach after the install, based in Lake Bluff.
Our process
How a Starlink installation works
- 01
Quote
Tell us about your home, your kit and how you'll use it. We quote the project, usually after a few photos or a short call.
- 02
Site survey
We check obstructions, pick the mount location and plan the cable path and WiFi layout before anything is drilled.
- 03
Install & configure
Mount, cabling, ethernet, WiFi and failover installed and set up, in one visit for most homes.
- 04
Walkthrough & support
We test every room with you, show you the app, and stay a phone call away after the job.
Service area
Starlink installation across the North Shore and Lake County
Looking for a Starlink installer near you? We're based in Lake Bluff and install throughout Lake County, IL, the North Shore suburbs and Chicago.
- Lake Bluff
- Lake Forest
- Highland Park
- Highwood
- Deerfield
- Northbrook
- Glencoe
- Winnetka
- Wilmette
- Libertyville
- Vernon Hills
- Waukegan
- Gurnee
- Lincoln Park (Chicago)
Don't see your town? See all service areas or call us. If we can do the job well, we will.
How much does professional Starlink installation cost?
Every home is quoted per project after a quick survey. The price depends on the mount type, your roof, how far the cable has to travel and how much WiFi coverage you need. Send a few photos or book a visit and we'll give you a fixed quote before any work starts.
Do I need to buy the Starlink kit first?
Most customers order the Starlink kit and service plan directly from Starlink, then schedule us to install it. If you haven't ordered yet, call us first. We can tell you which mount and accessories your home will need so you only buy once.
Can you mount Starlink without drilling into my roof?
Often, yes. Depending on the house, we can use a wall, eave or pole mount, or a non-penetrating ballast mount on a flat roof. We'll show you the options during the site survey.
Can Starlink be a backup to my Comcast or AT&T internet?
Yes. We connect Starlink and your existing internet to a router that supports automatic failover. If the cable or fiber line goes down, the house switches to Starlink on its own and switches back when service returns.
Will Starlink WiFi cover my whole house?
The included router works well in a smaller home. In larger homes we add mesh nodes or wired access points so you get full coverage on every floor, including basements and outdoor areas.
Can you run ethernet from Starlink to my office or TV?
Yes. With the Starlink ethernet adapter we can run Cat6 to a home office, TVs, gaming consoles or a network rack, and tie into existing structured wiring if your home has it.
How long does a Starlink installation take?
Most residential installs are finished in one day. Pole mounts, larger homes and jobs with extra wiring or access points can take longer. We'll give you a time estimate with your quote.
Do you install Starlink for businesses?
Yes. We install Starlink for offices, retail spaces, construction trailers and job sites, including automatic failover for businesses that can't afford to go offline.
Free quote
Get your Starlink installed right the first time
Send a few details and we'll follow up with next steps and a quote. Photos of the roof and where the router should go help us quote faster.
Prefer to talk?224-369-8752